Triplett 9055 Manual do Utilizador descarregar pdf (Página 32)

Measuring Temperature (Room)

1. Place meter in the location to be measured. Allow meter

to set in this location for at least 1 hour.

2. Set the Function Switch to any position other than OFF.

3. Read Room Temperature from the LCD.

Note:

Select °C or °F readout using the “°C / °F Room “ Button.

Measuring Temperature (using probe)

1. Insert the black plug of the temperature probe into the

COM jack and red plug into the " V/Hz%/Ω/Cap/

Temp "

jack.

2. Set the Function Switch to °C or °F as desired.

3. Touch the tip of the probe to the object to be measured.

4. Read the temperature on the LCD.

Notes:

The included probe can measure up to approximately 300 °F

without damage. To measure higher temperatures, use a

high temperature probe.

If the ambient temperature of the meter is changed suddenly,

the meter may display erroneous readings until the meter

reaches the same temperature as its surroundings.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Sem comentários

Triplett 9055 Manual do Utilizador Página 32