Triplett CamView PTZ – PN: 8000 Manual do Utilizador descarregar pdf (Página 30)

Page 28

‘Brightness’ can be varied from -128 to +127. A typical setting is +0.

‘Contrast’ can be varied from -128 to +127. A typical setting is +40.

‘Saturation’ can be varied from -128 to +127. A typical setting is +40.

Use the button to select the ‘Video Setting’ mode. Adjust the video settings

using the and buttons to select the desired parameter and

set its value.

MODE

The CamView PTZ automatically determines if the level is ‘Weak’, ‘Normal’ or

too strong (‘Exceed’) and displays a message below the level reading. Weak

is displayed when the signal is 20% low, and Exceed is displayed when the

signal is 20% too high.

112 IRE (0.8 Volts) and below = Weak

140 IRE (1.0 Volts) = Normal

168 IRE (1.2 Volts) = Exceed

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Sem comentários

Triplett CamView PTZ – PN: 8000 Manual do Utilizador Página 30