Triplett CamView PTZ – PN: 8000 Manual do Utilizador descarregar pdf (Página 38)

Page 36

4. Speciﬁcations Cont.

RJ-45 CABLE TEST

Tests Performed Tests 2 to 8 conductors for Opens, Shorts,

and Miswires.

Connections Female RJ-45 on CamView, Female RJ-45

on Remote. Tested cable must have male

RJ-45 connectors on both ends.

Indications Pin to pin connections displayed,

Opens and Shorts indicated with a red ‘X’.

PTZ data Capture and display

Test Performed Captures and displays PTZ data from

sending device.

Connections RS232: 9 pin D-sub (DB9)

RS422 and RS485: Alligator clips on

provided adaptor cable

Settings Port selection and Baud rate

POWER

AC Adaptor/Charger Input: 100 to 240VAC, 50/60Hz, 0.30A,

American Blade

Output: DC5V / 2A, 5.5mm x 2.1mm coaxial,

center positive

Battery Built-in 3.7V Lithium polymer battery, 2000mAh

Charging Time Approximately 4 hours for 90% charge (the

Charge

indicator LED turns o). Additional 1 hour for

full charge. Limit charging time to 8 hours for

best battery life.

Operating time on full

battery charge Approximately 11 hours

Auto Power o Selectable in 5 minute increments from 5 min to

60 min. Can be disabled.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Sem comentários

Triplett CamView PTZ – PN: 8000 Manual do Utilizador Página 38